Repair and maintenance methods of automatic weighing machine

The following checkweigher manufacturers will introduce you to the repair and maintenance methods of the automatic weighing machine: 1. Clean the scale body and cut off the power supply, and unplug the power cord. Wet the gauze and wring it dry, then dipped a little neutral cleaning liquid, and use it to clean the weighing pan, display filter and other parts of the weighing body. Note: Do not use any chemical solvents for cleaning. Avoid splashing water into the scale body during the cleaning process. If splashing into the scale body accidentally, wait for the water to dry before turning on the power, otherwise it may cause electric shock. Or damage the equipment. 2. Level calibration to check whether the scale body is normal. If it is tilted, please adjust the feet of the scale so that the blisters are placed in the middle position. 3. Clean the printer and cut off the power, open the plastic door on the right side of the scale body, hold the plum blossom handle on the outside of the printer, and drag the printer out of the scale body. Press the spring on the front of the printer, loosen the print head, and gently wipe the print head with the special print head cleaning pen in the scale accessory to clean the dirt on it. After wiping, cover the pen cap to prevent the cleaning fluid from evaporating in the pen, and then Wait for two minutes. After the cleaning liquid on the print head is fully evaporated, close the print head, push the printer back into the scale body, close the plastic door, power on the test, and it can be used normally after the print is clear. Note: To clean the print head, you must use the cleaning pen that comes with the scale. If the cleaning liquid in the cleaning pen is used up, you can find some clean soft cloth, dipped in a little absolute alcohol to wipe it. It is strictly forbidden for the automatic weighing machine to use other cleaning fluids or use hard objects to wipe the print head, otherwise it will cause damage to the print head. 4. Initialize the automatic weighing machine with zero-tracking and zero-clearing functions at power-on, and clean the foreign objects on the weighing pan after power-on, to ensure that the scale is powered on when there is no wind around. If there is a little weight display after power-on, you can press 'Clear' on the keyboard. The 'Zero' key restores the scale to the zero position. The checkweigher machine manufacturer reminded that during the weighing process, the automatic weighing machine should ensure that no foreign matter around the scale touches the sensor, and the bottom of the sensor should also be clean and free of foreign matter, otherwise it may cause problems such as inaccurate weighing.
weigher has become a standardized way of dealing with linear weigher.
And finally, if you want to find additional resources for weigher, simply go to Kenwei Multihead weighers for more.
When selecting the best products for customers, we considered not only the weigher, but also the multihead weigher packing machine.