Common faults and solutions of online checkweighers

The online checkweigher is a device for automatic weight detection, upper and lower line identification or weight classification selection on the assembly line. There may be some small faults during use, so how can we solve it by ourselves? 1. Weighing with online checkweighers Not allowed? Solution: (1) Check if other items touch the weighing tray; (2) Whether the equipment is calibrated and can be re-calibrated; (3) Whether there is wind blowing against the equipment; (4) Compare static weighing Whether it is consistent with dynamic weighing, if not, it can be corrected through 'dynamic learning'. 2. The online checkweigher rejection device does not work? Solution: (1) First check whether the power supply is connected normally; (2) If the power supply is normal, then click the corresponding 'rejection port' in the fault detection to see if it works; (3) If not Action, check whether the culling port is selected in the culling port. 3. The static weighing of the online checkweigher does not match the dynamic weighing? Solution: The weight of the object is in two states of static and winter, and there is an error in the weighing result itself, which can be corrected by 'dynamic learning'. 4. The conveyor belt of the checkweigher does not run? Solutions: (1) When all conveyor belts are not running: check the power supply; (2) When one or two sections are not running: check by reversing the motor and driver It is the quality of the motor drive; 5. Solutions to the problem of the conveyor belt of the online checkweigher: (1) If the equipment works abnormally or has deviations in accuracy and speed, please check whether the conveyor belt of the consumable parts is cracked; (2) ) Check whether the conveyor belt is deflected. If there is deflection, adjust the adjustment devices on both sides until the belt has no deflection. 6. The solution to the problem of accuracy and speed of the checkweigher machine: (1) Check whether the conveyor belt is cracked or deflected, For such problems, the conveyor belt can be replaced or adjusted to the normal position, and then tested; (2) Check the operation interface to see if the parameter settings are correct; if the parameters are set correctly, you can reset the value to be set according to the manual, and use the actual product to perform 10 Next, check whether the accuracy is stable.
As a entrepreneur, being trapped in a company under multiple quality problems never appealed to Guangdong Kenwei Intellectualized Machinery Co.,LTD..
We would appreciate your immediate attention to weigher.
Making a few technical tweaks to the way you structure and distribute weigher could be the difference between an engaging, thought-provoking product and a perfunctory one.
With the market analysts, exports from Guangdong Kenwei Intellectualized Machinery Co.,LTD. facilities in China will surpass the forecast.
Guangdong Kenwei Intellectualized Machinery Co.,LTD. can assure you that we never compromise on our quality standards and are one of the best in the market at present.