Workflow of Weighing Scales for the Food Industry
The work flow of the weighing scale in the food industry: 1. The tested product enters the active detection scale from one end of the assembly line, and is transported to the weighing section through the speed regulation section; 2. During the movement of the tested product in the weighing section, the sensor of the weighing machine It deforms under the action of gravity, changes its impedance, outputs an analog signal, and outputs it to the analog-to-digital converter of the weighing module through the expansion circuit, and quickly converts it into a digital signal and transmits it to the weighing module on the processor of the module; 3. Weighing The module processor extension identifies the component signals. If the product composition exceeds the preset upper and lower limit of composition, the processor will output a rejection instruction to the rejection device on the rejection section, and then reject the unqualified product from the rejection section. ----Automatic checkweigher machine The food industry inspection weigherjudges whether the product meets the standard weight required by the production according to the weight of the running product, and then classifies the unqualified products. The utility model relates to an assembly line with red light alarm and active removal processing Active weighing device. The food weighing scale is a belt-type industrial scale specially used for food, hardware, cosmetic masks, medicines, printing instructions, micro-fires, etc. Overweight and underweight detection, missing parts detection and weight classification of pots, dumplings, noodles and other products. The workflow of the online inspection scale is as follows: Preparation for weighing When the product enters the feed conveyor, the speed of the feed conveyor is determined by the combination of the product's speed setting spacing and the required speed. The purpose is to ensure that there is only one product on the weigherwhen the scale is working. Call heavy process When the product enters the weighing conveyor, the system will identify it according to the external signal, such as photoelectric switch signal or internal liquid level signal. Do not wait to check the product under test enters the weighing area. Based on the operating speed of the weighing conveyor and the length of the conveyor, or from the liquid level signal, the system can determine when the product leaves the weighing conveyor. From the time the product enters the weighing platform to the time it leaves the weighing platform, the load cell will be detected. The signal shown in the figure below is measured and controlled. Select the signal from the stable agricultural area for processing, and then the weight of the product can be obtained. ----Automatic weighing machine manufacturers
Many of us have heard about weigher and seen some of these units in operation in multihead weigher packing machine, linear weigher and multihead weigher packing machine spaces.
Guangdong Kenwei Intellectualized Machinery Co.,LTD. has been a leading server of for many years. Visit the website Kenwei Multihead weighers for quality weigher.
The only cardinal rule with adding animation is to keep high-quality on weigher.
weigher has a great positive reflects from our dear customers.
A primary strategy is superior customer satisfaction. Guangdong Kenwei Intellectualized Machinery Co.,LTD. constantly analyzes market needs around the world to develop a full range of products for different use.