The weighing machine is a kind of weighing equipment that is used in industries such as industry, agriculture, and food. It can help manufacturers produce qualified products more quickly. However, there are occasional problems in the process of use. Let's follow the staff of Sifang Packaging to learn and deal with it. When the weight detection machine shows no weight during operation, you can check whether the relevant joints of the sensor are loose, deal with and restart the equipment in time, and perform corresponding initialization and calibration. If the weighing value is unstable and has a large jump, we can check whether there is debris accumulated on the weighing tray of the weight detection machine, or the detected residue is missing. If not, we can check whether the sensor is affected by other objects. influences. It should be noted that, in order to ensure the stability of the weighing, we should regularly check the surrounding of the weighing tray and clean up the debris above it in time. In addition, when using the weight detector, sometimes there is a problem that the weight is unstable but cannot be reset after starting up. This may be due to the influence of wind elements in the environment or the sundries against the pallet. However, if the weight base on the display screen is large after booting, it may be caused by the device being damp, and it will recover after a period of time after booting. The above are some of the problems and solutions that occur during the use of the weight detection machine. If you have more questions, please contact Guangdong Kenwei Intellectualized Machinery Co.,LTD., we will provide you with more solutions. After years of product technology research and development work, with rich practical experience, he has provided tailor-made solutions for many enterprises' automated checkweighing technology transformation projects; the products developed and manufactured are stable and beautiful, and have been unanimously recognized by customers at home and abroad.
Finding a reliable solution for the weigher linear weigher not only supports operation of the entire system but also enhance the beauty of your workplace.
We are dedicated to providing you with more than just customer service by utilizing our qualified team who pride themselves on meeting and exceeding customer's needs. We also have ell-equipped plantin China with advanced facilities to manufacture multihead weigher packing machine weigher products according to customers requirements. Welcome to send your enquiry and visit our factory. Our website is Kenwei Multihead weighers.
For Guangdong Kenwei Intellectualized Machinery Co.,LTD. as a whole to adopt an attitude of acceptance toward change and technological innovation, we first have to truly embrace it and practice what they preach. Technological development needs to be more than just another investment, but a complete integration.

Common problems and troubleshooting methods of weighing, printing and labeling machines 1. Can omissions or denials be detected? Yes. Now there are CCD camera devices. Able to confirm whether the label is moving, whether the color is correct, whether the label is in front of or behind the object, etc. At this time, the electric eye is used to give an electric signal to the solenoid valve through the circuit, so that the cylinder can push the detected objects with inaccurate marks out of the conveyor belt. 2. What issues should be considered when the weighing, printing and labeling machine is a distribution line? Label wrapping direction Data operation and label posting direction Production line production and line speed Conveying direction and operation direction Conveyor height Are there any special requirements for the connection method and interface with other machines on the production line? Is there enough space on the production line for labelling machines? 3. What are the requirements for using the same weighing, printing and labeling machine to complete the stickers of various objects? If multiple bottles belong to the same classification group, in many cases, as long as the corresponding wheels and ceramic plates are replaced, they can be produced from scratch with the same productivity. For other assortment groups, there is a general need to replace the conveyor belt. Cross-group products with small diameter differences can be custom marked on the same conveyor belt through non-standard, but with a lower label speed target. 4. What device does the weighing, printing and labeling machine go through to complete the rotation adjustment of the sticker around X, Y, and Z? The sticker has two parts: the beam rotation organization and the sticker adjustment bracket. These two parts can be adjusted and rotated within the required angle range around the three directions of X, Y, and Z. Regarding stickers of different shapes, it is possible to secure stickers on stickers in different directions. (William Shakespeare, stickers, stickers, stickers, stickers, stickers, stickers, stickers. 5. Weighing and printing labelling machines The printing presses that can be used to print words on labels are (A, C, E, F), which can be used in The printing machine that prints words on the label is (C, E) a) tropical printing machine b) thermal ink roller printing machine c) small character jet machine b) large text printer e) laser sander f) thermal transfer printing machine 6. When will it be printed on the label? How many printing methods are there? The stickers generally have 'batch number, production date, expiration dateany idea? Usually there is a thermal ribbon printing machine, or a jet plane, a sander is connected to the sticker, and it is printed on the spot. Jet code, slash code, thermal electronic printing can compile certain information (such as serial number) for printing. Tropical printing requires replacing the copper alloy particles on the print head to change the print information. 7. Why do users supply samples (stickers, labels) according to technical requirements? Because the shape of the sticker has changed due to reasons such as anti-counterfeiting or characteristics of various enterprises, the bonsai, sticker, label/sticker actions performed on the weighing, printing and labeling machine are closely related to the shape of the sticker. It can be planned according to the given length, width, height (diameter, height) scale, and can also simulate the testing machine with similar standard samples. Therefore, customers are generally required to provide samples. If they are not available, the operation status of our samples should be explained in advance during inspection.