Analysis of the common failure causes of automatic weighing machines
Today, the editor of Kenwei will talk about the analysis of common faults of automatic weighing machines: 1) Why is the equipment weighing inaccurate? A. Check whether other items touch the weighing tray; B. Whether the equipment is calibrated, it can be calibrated from the beginning; C. Whether there is wind blowing against the equipment; D. Compare whether the static weighing and dynamic weighing are consistent, if not It can be corrected by 'dynamic learning'. 2) The rejection device does not work? A. First check whether the power supply is connected normally; B. The power supply is normal, and then click the corresponding 'remove port' in the fault detection to see if it works; C. If it does not work, check whether the right port is selected in the remove port. 3) Static weighing does not match dynamic weighing? The weight of the object is in two states of static and winter, and the result of weighing itself has errors, which can be corrected by 'dynamic learning'. 4) The conveyor belt is not running? A. When all conveyor belts are not running: Check the power supply; B. When one or two sections are not running: You can check whether the motor is driven by swapping the motor and driver; 5) Conveyor belt problems 1) If If the equipment work shows abnormal operation or errors such as accuracy and speed, please check whether the conveyor belt of consumable parts is cracked; 2) Check whether the conveyor belt is deflected. If there is deflection, adjust the adjustment equipment at both ends until the belt has no deflection; 6) Accuracy and speed problems 1) Check whether the conveyor belt is cracked or deflected. For such problems, replace or adjust the conveyor belt to the normal position before testing; 2) Check the operation interface and whether the parameter settings are correct; parameter setting problems , You can re-set the required value according to the manual, and use the measured product 10 times to check whether the accuracy is stable; 7) After disassembling or inspecting the equipment, correctly reset the connectors and parts that were disassembled for inspection. After the inspection is over After that, please reset it correctly from the beginning. 8) If the failure is not caused by equipment factors, such as sudden environmental changes, abnormal power supply caused by lightning or abnormal voltage, falling or impact of the machine, or direct causes of accidents that are not caused by normal use, it is necessary to conduct a comprehensive inspection. Checkweigher manufacturers believe that punctual maintenance can not only save costs, but also make production work normally.
Guangdong Kenwei Intellectualized Machinery Co.,LTD. promises that we will manufature our products in accordance with the strictest quality standards.
Guangdong Kenwei Intellectualized Machinery Co.,LTD. is working with the best teams, aligned with international standards and practices to focus on R&D and manufacture of products, and are continuously launching new products in the market. Get to know us at Kenwei Multihead weighers.
Advanced technology and manufacturing equipment has enhanced the core quality of weigher.
For Guangdong Kenwei Intellectualized Machinery Co.,LTD. as a whole to adopt an attitude of acceptance toward change and technological innovation, we first have to truly embrace it and practice what they preach. Technological development needs to be more than just another investment, but a complete integration.