What should I pay attention to when printing and labeling round bottle labels?
Today, the editor of Kenwei will talk to you about what should be paid attention to in the labeling of round bottles with the printing and labeling machine? The printing and labeling machine is usually operated by a touch screen, which can effectively ensure the accuracy of labeling with the smallest error; it can be adjusted according to the bottle type and label. What are the precautions for the repeated use of the printing and labeling machine? 1. Confirm the conveying direction and direction of the conveyor belt; 2. Whether the placement direction of the round bottle on the production line and the automatic labeling machine is the same; 3. The operation of the round bottle product is consistent with the labeling direction; 4. The output and speed of the assembly line To keep up with the automatic labeling machine; 5. Is the height of the conveying surface appropriate? How to transition the bottle; 6. Whether there are special requirements for the connection method and interface between the production line and other machines; 7. Whether the packaging production line has reserved enough space for the labeling machine; 8. The winding direction of the label roll should be correct. Maintenance details of the printing and labeling machine: It is easy to inhale dust during operation, and the dust on the labeling machine needs to be cleaned regularly. When the device is temporarily idle, unplug it and cover it with a dust cloth to prevent dust from falling on the device. In addition, high temperature areas should be regularly decontaminated to better ensure high-quality operation of the equipment. Don't forget to lubricate equipment maintenance. After long-term operation, apply a certain amount of lubricating oil. Many parts of the equipment, such as gears, bearings, gearboxes, etc., are prone to rust and wear after a period of use. And by applying lubricating oil, the smoothness of each part can be guaranteed. It should be noted that after the equipment has been working continuously for more than 48 hours, lubricating oil should be applied.