What are the processes of the weightlessness scale during the batching

The weightlessness scale is also called the initial weightlessness feeder. It is a device used in the production workshop to provide feed for the production line. There are also many weightless scales in the batching process, so what process does the weightless scale have during the batching process? Let's take a look now! ! There are two main stages in the weightlessness scale during the batching, one is feeding and the other is dumping. After the batching starts, the feeder is first started, and the control panel checks and samples the net weight of the metering hopper material. When the net weight of the metering hopper material reaches the upper limit of the specified value of the batching, the feeding is stopped. In addition, the control board checks and samples the net weight of the material in the measuring hopper. When the net weight of the material in the measuring hopper reaches the maximum value set by the ingredients, the feeding is stopped. In the dumping link, the control panel starts the dumping feeder, and unloads the materials in the weighing hopper from the weighing hopper to the discharge port and other machinery and equipment. When the material is poured, the control board inspects and samples the net weight of the material in the measuring hopper. When the net weight of the material in the measuring hopper reaches the lower limit value set by the batching, the material is then fed to the measuring hopper. But just after the feeding process started, the feeding machine has not stopped feeding again. The software of the continuous feeding system of the weightless scale includes a weighing hopper, which performs the weighing of the feeding mechanism, which is equivalent to a static data scale; in addition, the total flow of the feeding mechanism is controlled according to the DC frequency conversion variable speed. In the weighing hopper of the weightlessness scale, the reduction of the net weight of the material per unit time should be the total feed flow of the weightlessness scale, and it is automatically adjusted according to the adjustment speed, so as to maintain the total feed flow. When the net weight of the material in the metering hopper is less than the control parameter, the weightlessness scale module locks the feeder speed, maintains the opening organization for feeding according to the volumetric method, and opens the feeding valve for fast feeding. When the net weight of the material in the metering hopper reaches the upper control parameter, all the feeding valves are automatically closed. There is also a weightless balance control board, which automatically converts the cutting mechanism to the balance method. The above is about the content of the weightless scale in the batching process. I hope it will be of some help to you all.