What are the daily maintenance and maintenance of the weighing and labeling machine
Weighing and labeling machine is a mechanical equipment already owned by many manufacturers. It can help the products produced by these manufacturers to put on labels, but many manufacturers will directly put it into use after purchasing this kind of mechanical equipment, and will make It works continuously, but does not maintain and maintain it, which will cause excessive wear and tear of the weighing and labeling machine and some small failures will occur, and will also affect its service life, so this equipment is maintained during normal use. Maintenance is also more important. The weighing and labeling machine must be cleaned during daily use, because this kind of machine is easy to enter some dust in the process of work. If it is not cleaned for a long time, the dust will accumulate on the surface and inside of the machine. , It is easy to affect its normal working performance, and there will be adverse consequences such as inaccurate labeling and inaccurate weighing. Therefore, the weighing and labeling machine should be cleaned inside and outside every time it is in contact with work or every day off work. Clean up all the dust on or inside it. The weighing and labeling machine must be cut off when it stops working or is idle, especially when it is limited for many days or a long time, unplug the power supply and cover the whole machine with a dust cloth to avoid dust sticking to the surface of the machine and affecting its normal use. The high-temperature bag type of the weighing and labeling machine is an important part of this machine. It needs to be cleaned and decontaminated regularly during daily use. Only in this way can the height belt be kept clean and it can be maintained at a constant temperature. , can make it work normally, and will not affect the labeling effect due to the high temperature being too low. There are some gear bearings and gearboxes inside the weighing and labeling machine. These parts need a certain amount of lubricating oil to lubricate during work. If the lubricating oil is insufficient, these parts will be seriously affected and their normal work will be affected. Therefore, in daily maintenance When maintaining the weighing and labeling machine, you should always add an appropriate amount of lubricating oil to it, but the type of lubricating oil should be kept uniform and cannot be replaced at will. In addition, some special weighing and labeling machines are marked with obvious signs on the obvious parts, indicating that the equipment should be added with lubricating oil as soon as possible when it continues to work for more than 48 hours. In such a situation, you must follow the prompts. There is also a weighing sensor electric ball inside the weighing and labeling machine, which is a part that needs to be protected. It is an important part of the machine to complete the product charging. If the weighing of the equipment is inaccurate or the weighing display is zero , it is necessary to check this part as soon as possible to see if it has open welding or damage, and ask professionals to repair them. Only in this way can the equipment be properly weighed and accurately weighed.