What are the common faults in the use of automatic checkweighers

Checkweighers are becoming more and more widely used. With the widespread use of checkweighers, more and more users are aware of the advantages of checkweighers. However, the automatic checkweigher machine has been used for a long time, and some failures will inevitably occur. For this reason, we don't have to worry about it, we can first try to analyze ourselves and find out the reason. Today, Kenwei's editor will tell us the reasons for the common problems of automatic checkweighers. Hope this article can bring us some help. Analysis of common failure causes of automatic checkweighers: 1) Why is equipment weighing prohibited? a. Check whether other items touch the weighing tray; b. Whether the equipment is calibrated, it can be calibrated from the beginning; c. Whether there is wind blowing to the equipment; d. Compare whether the static weighing and dynamic weighing are consistent, if not, then Correction by 'dynamic learning'. 2) Disassemble the device without action? a. First check whether the power connection is normal; b. If the power is normal, click the corresponding 'Remove Port' in the fault detection to see if it works; c. If no measures are taken, please check whether the removal port is selected in the removal port correct. 3) Are static weighing and dynamic weighing inconsistent? When the components of the object are in static and winter states, there is an error in the weighing result, which can be corrected by 'dynamic learning'. 4) Conveyor belt not working? a. When all conveyor belts do not work: check the power supply; b. When one or two sections do not work: Check the motor drive by adjusting the motor and driver; 5) Conveyor belt problems a. If the equipment works abnormally or If there is deviation in accuracy and speed, please check whether the conveyor belt of wearing parts has cracks; b. Check whether the conveyor belt is skewed. If there is skew, adjust the conditioning equipment at both ends until the conveyor belt stops without skew; 6) Accuracy and speed issues a. Check for broken or skewed conveyor belts. Such problems can be replaced or adjusted to the normal direction before the test; B. Check whether the operation interface and parameter settings are correct; for parameter settings, the required values u200bu200bcan be set from scratch according to the manual, and the tested product can be used 10 times to check whether the accuracy is stable; 7) After dismantling or inspecting the equipment, properly reset the connectors and parts that have been dismantled and inspected. After checking, please reset properly from the beginning. 8) Failure caused by non-equipment factors When sudden environmental changes, abnormal power supply caused by lightning or abnormal voltage, machine fall and impact, and direct failure caused by abnormal use, a comprehensive inspection must be carried out. Regular maintenance not only saves costs, but also keeps production running smoothly.

weigher linear weigher has gained a lot of popularity over the recent past.

have become more diverse in appearance and function thanks to the advanced technology. Choose a that you can trust to deliver an excellent user experience reliable performance at Kenwei Multihead weighers.

Although there are various available in the market (such as multihead weigher packing machine, linear weigher, and multihead weigher packing machine), recent study results have made this linear weigher weigher a preferred weigher choice of the people.