Vacuum packaging machine
Operation of the vacuum packaging machine: ①Turn on the power, choose the time of pumping, heating temperature, heating time, etc. In the unfamiliar situation, it can be adjusted according to the sealing situation. ② Put the packed plastic bag into the vacuum chamber, and place the bag mouth neatly on the heat seal. ③Press down the machine cover, the vacuum pump starts to pump air, and at the same time suck the machine cover. After pumping to the required vacuum degree, it will automatically seal. After sealing, lift the cover and take out the packaging bag. ④ Check whether there is any problem with the sealing quality of the bag. If the vacuum is not enough, you can adjust the vacuuming time. If the sealing is not firm, you can adjust the heat sealing time. If the sealing is broken or wrinkled, you need to shorten the heat sealing time. ⑤ When the machine is stopped, please turn off the power switch and unplug it. 1. Put the food in the bag. Clean the mouth of the bag, remove dust, and smooth out folds or folds. 2. Put the opening of the bag into the vacuum chamber below the air inlet. Don't pack excess food. Close the lid, then press the lid on both sides to lock the buckle. 4. Press the vacuum/sealing button, the green LED will flash, and it will automatically enter the vacuum pumping state. 5. When the LED light turns red, it enters the automatic sealing state. 6. When the LED turns green again, the vacuum sealing process is complete. Open the vacuum release valve to release the vacuum pressure inside the machine. Open the lid and remove the refrigerated or freezer-sealed food bag from the bag. Independent sealing operation: 1. Plug in the power plug, the green LED light is on. 2. Put one end of the bag on the heating sealing strip, but make sure that the end of the bag cannot enter the vacuum chamber. Close the lid, then press and hold both sides of the lid, lock the buckle, press the 'seal' button, and the LED will turn red for 3 seconds. Then press and hold the LED light with both hands until the LED light turns from red to green. After sealing, open the top cover and take out the bag.
weigher has become a standardized way of dealing with linear weigher.
Guangdong Kenwei Intellectualized Machinery Co.,LTD. is the major weigher provider. multihead weigher packing machine businesses need the right tools at their disposal in order to handle linear weigher. Kenwei Multihead weighers is your best choice.
There are different types of , mainly multihead weigher packing machine and linear weigher.
Our company specializes in selling weigher as well as providing relevant services.
The first machine to produce multihead weigher packing machine, the linear weigher weigher was invented in multihead weigher packing machine in linear weigher by multihead weigher packing machine and was subsequently improved.