Transmission device and structure design of weightlessness scale
In the whole process of developing the application of the weightlessness scale, what customers care most about is the precision of the product. In the whole process of developing the design plan, the linearity of the weightlessness scale can be reasonably improved, and in the whole process of developing the design plan. Must choose its suitable application frequency, the application frequency of machinery and equipment must be maintained at 40hz as the best. If the frequency of the weightlessness scale is too low during application, the reliability of all system software will be worse. The measuring range of the sensors of the machinery and equipment must be appropriate during the whole selection process, and the data signal of all the machinery and equipment will be changed. The scope is relatively wide, so that the linearity of its machinery and equipment can be improved reasonably. The entire structure of the weightless scale must be reasonably ensured in the whole process of the design plan to ensure that the circulation of its raw materials is good, so that the length of time for its replenishment can be additionally ensured, and the replenishment of machinery and equipment should not be excessively frequent. Under normal circumstances, it is specified as 5 It will be refilled at once within 10 minutes. The transmission device of the supporting facilities of the weightlessness scale can reasonably ensure the stable operation, the line shape of the whole machine and equipment, the basic principle design plan of the net weight damage of the machine and equipment in the whole process of work, the raw material in the machine and equipment load-bearing device The net weight can be reasonably converted into analog input and sent to the program controller according to its net weight smart transmitter and its weighing sensor. The reasonable operation of the programmable controller in the weightless scale will carry out a reasonable comparison and discrimination between the measured raw material net weight and the left and right limit values u200bu200bof the net weight of the machine and equipment, and then reasonably operate the feeder equipment to interrupt the feeding into the load-bearing device according to its operation. The program controller manipulates its measured specific cutting speed. The weightlessness scale can reasonably adjust and operate the soft starter according to its PID during operation, so that it can reasonably control its feeding equipment, the specific feeding speed of the machinery and equipment can accurately track its preset value, and the feeder of the machinery and equipment The equipment is opened to load materials into the load-bearing device reasonably.