The whole process of installing a weightless scale and common problems

In the whole process of the first application and installation of the weightless scale, its weighing platform must be firm and fixed. The weight sensor of the weightless scale is an elastic deformation element. If there is external vibration, the weight sensor will be affected and the measurement will be endangered. Verification precision. The weightlessness scale should not have the fluidity of gas in the natural environment when it is applied. If all its movement occurs, its sensor will be affected immediately, which is very small in total flow. The left and right conductive soft connections of the weightlessness scale must be light and soft, so as to reasonably prevent the left and right machinery and equipment from affecting the weightlessness scale. At this stage, the ideal raw material for the application of machinery and equipment is smooth and soft silk, the upper silo and the large hopper The smaller the distance between the connections, the better. The longer the connection distance between the upper hopper and the large hopper of the weightlessness scale, the more and more raw materials adhered to the wall thickness. When the raw materials in the wall thickness adhere to a certain level, the Weightlessness scale is a very big influence. The weightless scale must try to avoid external connections during the entire operation. The external net weight of the machine and equipment must remain stable, and its key purpose is to better reduce external interactions. The harm of force to its scale body. During the whole feeding process of the weightlessness scale, the speed should be fast. For raw materials with poor circulation, the railway bridge should be avoided. A good solution is to carry out the mixing, but when adding the mixing machine, the measurement of the sensor should be taken into consideration. Range to ensure the precision of the weightlessness scale.