The weightlessness scale has high measurement accuracy and adopts a fully enclosed structure
The loss-in-weight scale can guarantee the continuous weighing of the feeding system and feeding mechanism, so it is quite similar to the static scale, because it needs to use the frequency conversion debugging method to measure the entire feeding mechanism and the unloading mechanism. The flow rate is controlled, so the weight-loss scale can be divided into two parts: control and system based on the basic composition. 1. The weightlessness scale is relatively high in accuracy: When the weightlessness scale is in working condition, the granary is basically guaranteed to be in a static state in measurement, and it needs to be measured after loading and unloading, and according to different working conditions, The quality difference value is calculated. If the difference value and the flow rate are given an error, then effective compensation can be carried out in the subsequent period. Moreover, the entire weight measurement can be completed within a few minutes, so during the weightlessness weighing process, there will be no sensor zero drift, or temperature drift and other factors, so the accuracy of the measurement is very high. The measurement accuracy of the whole system can reach between 0.5% and 0.2%. 2. The weightlessness scale adopts a fully enclosed structure: because the weightlessness scale is a fully enclosed structure, it can be used in a variety of harsh environments. The material of the entire structure is steel, even in poor conditions. It can also be used in occasions, and it is very durable and sturdy. It basically does not require special maintenance and is not afraid of high-temperature materials. The weightlessness scale is fully enclosed in structure to ensure that there will be no dust during the batching process, and the dust removal device is also eliminated. The structure is more simple and convenient. It does not need to be used with a belt scale, which not only saves Resources will also save a lot of investment, the most important thing is to node and improve production efficiency.