The entire feeding process and control work of the weightless scale

During the entire operation of the weightless scale, the raw materials of the silo on the machine and equipment will gradually decrease. When the raw materials in the silo are reduced to the set replenishment range, the weightlessness scale output module controls the replenishment equipment just to start feeding. In addition, machinery and equipment must operate in a precise volumetric mode. The key to the whole process of the weightlessness scale is that the customer's raw materials are supplied to the silo of the machine and equipment in a reasonable supply warehouse. After the network of the weightlessness scale detects that the raw materials are added to the set position, it must immediately terminate the feeding automatically. The whole process. After the weightlessness scale has been fed, its machinery and equipment will operate. During the entire operation, the weighing sensor collects the total flow data in real time and provides a reasonable solution to the weighing control board. On the one hand, the data information is transmitted to the touch screen, so that it is suitable for the communication of the display information of the interface and its data information. On the other hand, it is reasonable to manipulate the speed ratio of the motor to achieve the purpose of adjusting the total flow reasonably. The key to the whole process of the weightless scale is the weighing silo, the feeder organization, the weighing platform, the automatic control system and its control panel and other components. The key to the machinery and equipment is based on the static weighing method. Fully automatic weighing system that maintains high precision and continuous quantitative analysis of the feeder. In the entire application process, precise, reliable and stable feeders can be implemented for dry bulk raw materials such as particles, powders, and blocks, which can reduce the luxury and waste of raw materials and improve the consistency of the compound. The weightlessness scale will be discharged from the weightlessness scale along with the raw materials during the whole application process, so that the automatic control system of the machine equipment will carry out a high-speed and high-frequency collection of the net weight data signal of the scale body, so that it can be used in the enterprise time. The reduced net weight of raw materials in the measurement verification.