The combination of multi-head microcomputer maintenance maintenance
The combination of multi-head microcomputer maintenance maintenance can be divided into the following four steps:
1. Clean multi-head microcomputer combination weighing platform:
1. After cutting off the multi-head microcomputer combination weighing power, unplug the power cord;
2. Wet the gauze and wring it well, then dip in a little neutral cleaning liquid (such as alcohol) and use it to clean the weighing pan, display filter and other parts of the scale body. The conveyor belt that can be easily loaded and unloaded can be washed with warm water;
3. Wash the warm water at about 45 ° C once a week, soak the multi-head microcomputer combination conveyor belt in boiling water for about 5 minutes.
?
Second, clean the printer (under the premise that the device is equipped with a printer):
1. Turn off the power, open the plastic door on the right side of the weighing machine scale, hold the plum handle on the outside of the printer, and drag the printer out of the weighing scale body;
2. Press the front of the printer, release the print head, and gently wipe the print head with the special print head cleaning pen included in the scale attachment. After the cleaning and wiping, the pen cap is covered to prevent the cleaning liquid in the pen from volatilizing;
3. Then wait for two minutes. After the cleaning liquid on the print head has fully evaporated, close the print head and push the printer back into the scale body. After power-on detection, it can be used normally after the print is clear.
Third, the host part is clean:
1. The power must be cut off to prevent the risk of electric shock, and then the multi-head microcomputer combination scale can be cleaned;
2. Selection of cleaning utensils, please use a cloth moistened with water or neutral detergent for cleaning;
3. Do not use thinners and organic solvents such as benzene-to prevent corrosion of objects and the body and affect the use
4. Do not use metal brushes to prevent scratching of objects and body.
?
4. Maintenance of multi-head microcomputer combination scale:
1. Pollution caused by touch and fingerprints can be wiped with a sponge or cloth containing organic solvents (alcohol, gasoline, acetone, etc.) when neutral detergent or soap cannot be completely removed;
2. If the rust caused by the adhesion of the cleaning agent cannot be removed with a neutral detergent, please use a cleaning solution;
3. The rust caused by iron powder or salt in the process of machine operation can be wiped with a sponge or cloth containing neutral detergent or soapy water, which can be easily removed and wiped clean.