Talking about the partial cleaning of the main machine of the sorting scale
As production and life become more and more intelligent, sorting scales (ie, weight sorting machines) are used in major production industries. The use of the sorting scale greatly helps to carry out more efficient production and is a powerful helper in the human industry. However, as the sorting scale is not used for a long time, stains will remain on the surface of the machine, so people need to clean the sorting scale as necessary. Below, the editor will introduce the detailed steps of cleaning the sorting scale. 1. Clean the sorting scale and weighing platform: After cutting off the power of the sorting scale, unplug the power cord. Soak the gauze and wring it dry, then dip a little neutral cleaning fluid (such as alcohol), use it to clean the weighing pan, display filter and other parts of the weighing body. The conveyor belt that can be easily loaded and unloaded can be cleaned with warm water. Wash with warm water at about 45°C once a week, and soak the conveyor belt of the sorting scale in boiling water for about 5 minutes. Second, the cleaning of the main machine of the sorting scale: 1. The power supply must be cut off to prevent the danger of electric shock, and then the weight sorting machine can be cleaned. 2. To choose cleaning utensils, please use a cloth moistened with water or a neutral detergent for cleaning. 3. Do not use organic solvents such as thinners and benzene-to prevent corrosion of objects and the body, affecting the use. 4. Do not use metal brushes to prevent scratches on objects and the body. 3. Cleaning the printer of the sorting scale (if the equipment is equipped with a printer): cut off the power, open the plastic door on the right side of the scale body, hold the plum blossom handle on the outside of the printer, and drag the printer out of the scale body. Press the front of the printer, loosen the print head, and gently wipe the print head with the special print head cleaning pen attached to the scale accessory. After cleaning and wiping, cover the pen cap to prevent the cleaning fluid from evaporating in the pen, and then wait two minutes for the print head After the upper cleaning fluid is fully evaporated, close the print head, push the printer back into the scale body, close the plastic door, power on and test, and you can use it normally after the print is clear.