Precautions for weightless scale installation and equipment maintenance
The weightless scale cannot be placed on the top before starting. The fundamental reason is that it will immediately cause its electric opportunity to bear its excessive working pressure and cause its motor to burn out. Therefore, the weightless scale must be checked immediately before each start. Whether there are any items on the top, if there are any, they must be removed immediately. Some powdery raw materials will immediately cause a lot of smoke and dust to accumulate in the control box of its weightless scale. If it is used for a long time, it will immediately cause short-circuit faults in the internal power circuit of its machinery and equipment, which will immediately damage its household appliances. Or other components. The operation of the weightless scale must immediately clean up the dust in the control cabinet after a period of time. The key driving force in the machine and equipment is the electric motor. Therefore, the speed of rotation is very high, and the machine and equipment must transmit the driving force. For a reasonable reducer, the motor must be checked reasonably during normal application. In order to reasonably ensure the precision of its weightlessness scale, there are many key points that must be paid attention to in the whole process of application and installation. The weighing platform in the machine equipment must be firm during the whole process of fixing it. Sensors in machinery and equipment are ductile and deformable components. Weightlessness scales can cause its effects under external vibration. The most taboo thing about machinery and equipment in the whole process of application is that the natural environment vibration hazards. The natural environment used must not have its cyclonic fluidity, so that it can Reasonably improve the precision of its weighing. The sensor on the top of the weightless scale is very sensitive during the entire application process, and all movements and statics are caused by it. The smaller the distance between the upper silo and the large hopper, the better, especially for these adhesions. Stronger raw materials.