Packaging Machine Cutter Troubleshooting
After the fault is started, the cutting knife does not run: 1. Open the control panel and check whether the cutting knife is disabled. 2. Check whether the cutter start time is set correctly. 3. After closing the horizontal seal, check whether the sensor on the cylinder has a signal. 4. Check whether the solenoid valve (including circuit and coil) and cylinder are damaged. Fault 2 No response to the operation of the packaging machine: 1. Check whether the touch screen communicates with the PLC. 2. Check whether the PLC works normally. 3. Check whether the emergency stop switch is pressed. 4. Check whether the packing machine is turned on. If it is turned on, it means whether the contactor in the control cabinet of the packing machine is damaged.
need huge investment, so it is important to shop with caution.
Guangdong Kenwei Intellectualized Machinery Co.,LTD. will deliver superior returns to our shareholders by tirelessly pursuing new growth opportunities while continually improving our profitability, a socially responsible, ethical company that is watched and emulated as a model of success.
Guangdong Kenwei Intellectualized Machinery Co.,LTD. has extented its range of manufacturing scale, which satisfys customers' needs.