Maintenance tips for metal detectors
Metal detectors are also known as metal detectors, metal detectors, gold detectors, etc. Because metal detectors are highly sensitive detection instruments, they have relatively strict requirements on the environment and machine maintenance. Therefore, after a period of use, in order to ensure normal use, the conveyor belt and other easily damaged parts should be cleaned regularly every day. 1. Cleaning utensils: Find a clean towel, wet it with water and wring it out until the water cannot be squeezed out. 2. Clean the surface of the conveyor belt: Note that the sensitivity of the metal detector should be adjusted to the lowest level before cleaning. If the metal detector has B/C mode, please adjust the metal detector to C mode, so as not to affect the next step if the sensitivity is too high cleaning work. Then straighten the towel and press it properly on the surface of the conveyor belt, start the machine, and make the machine run for more than five laps (the purpose is to clean the pollutants on the surface of the conveyor belt, the method can be applied flexibly), then wash the towel and wring it dry, Repeat this step again to wipe the conveyor belt until there is no obvious contamination on the surface of the conveyor belt. 3. Clean the back of the conveyor belt: then wash the towel and wring it dry, pass the towel through the bottom of the conveyor belt from the lower part of the machine, straighten the towel, and put it on the conveyor belt. The towel is drawn to the front of the conveyor, grasp the towel at both ends, and start the machine to run it for several weeks. Since the bottom of the conveyor belt is the dirtiest place, it needs to be wiped several times. After every few weeks of operation, remove the towel and wash it again and repeat the above steps. 4. How to judge the cleaning effect: After the needle detector conveyor belt has gone through the above two cleaning steps, adjust the sensitivity to 8 or the highest sensitivity, start the machine, and let the machine run, if the machine runs smoothly and the probe metal position display light is off At this time, put clothes without any metal impurities at this time, and the clothes can pass through the needle detector channel smoothly, that is, the conveyor belt has been cleaned successfully! I hope the above 4 points can be helpful to you. Zhongshan Kenwei is a manufacturer specializing in the production of metal checkweighers. Our company has professionals who can design ideal products according to your actual needs. You are welcome to click here to contact us at any time to learn more details!
Guangdong Kenwei Intellectualized Machinery Co.,LTD.'s has been able to achieve excellent performance in an extremely competitive industry.
Guangdong Kenwei Intellectualized Machinery Co.,LTD. offers a vast array of , and for all tastes and styles. When you want to kick your linear weigher up a notch, you want Kenwei Multihead weighers!
Looking for Manufacturers in China? Then Guangdong Kenwei Intellectualized Machinery Co.,LTD. is the right choice. we are a well known multihead weigher packing machine weigher Manufacturers and suppliers from China.