Introduction of weight sorting machine manufacturers, the use of electronic platform scales

1 Installation of the electronic platform scale Before installing the electronic scale, you should refer to the list of scales to check whether the list of parts is complete and in good condition, and then carefully and carefully clean each part of the scale with a brush and a clean soft gauze. A dust-proof, shock-proof, moisture-proof, and temperature-free room is selected as the balance room, and a high-precision platform scale can be placed in a constant temperature greenhouse. Thirdly, the scale should be placed on a firm and reliable work surface and placed in a suitable location for easy operation. During installation, the accuracy of the platform scale should be correctly installed and calibrated in strict accordance with the installation instructions. After the installation is complete, you can check whether the installation of each part is normal, and finally check whether the power supply voltage meets the requirements of the platform scale. After everything is ready, you can ask the local Quality and Technical Supervision Bureau for appraisal, and it can be put into use only after it is qualified. 2 Preheating of the electronic platform scale Before starting to use the electronic balance, the machine needs to be preheated for 30min~1h. For electronic balances with metrological verification or with an actual scale of 0.01mg, the warm-up time should be greater than 5h; for microelectronic balances with an actual scale of 0.001mg, it needs to be warmed up for more than 24h. If you want to use the scales multiple times a day, it is recommended to keep them open all day long. In this way, the electronic balance can have a constant working temperature, which is conducive to the accuracy of the weighing process. For high-precision balances, if conditions permit, the balance can always be warmed up by constant current. The price of the weight sorting machine 3 The sensitivity of the electronic platform scale calibration electronic balance is high, the movement of the position, the change of the environmental temperature and humidity, all easily cause the weighing result to be inaccurate. Users should always calibrate the balance by themselves to ensure that the balance has good accuracy during use. For continuous use, calibrate approximately once a week. Standard weights must be used for calibration. Some balances contain standard weights that can be used to calibrate the balance. Before calibration, the electronic balance must be turned on to warm up for more than 1 hour, and the liquid level must be checked. The calibration should be carried out in accordance with the prescribed procedures, otherwise the calibration will not function. Weight sorting machine 4 Correct operation of electronic platform scale In the weighing operation of electronic platform, the control keys and function keys should be used correctly; select the better integration time, correctly grasp the reading and printing time, so that the final result of the weighing can be more improved. precise. When using the peeling key for continuous weighing, pay attention to the overload of the scale. After using the electronic platform scale, turn off the power and cover the dust cover.