Installation and Adjustment of Conveyor Belt of Weight Sorter

Installation of the conveyor belt of the weight sorting machine: 1. Rotate the adjusting nut to adjust the distance between the driven shaft and the driving shaft to a small gear; 2. Check the running direction of the belt of the weight sorting machine, and move the belt in the direction of the thick arrow in the manual Set into tray. 3. Adjust the adjusting nuts on both sides of the tray to make the tension of the belt moderate. and center the belt on the pallet. Adjustment of the conveyor belt of the weight sorting machine: 1. Adjust the tension of the belt to a moderate level, put it on the machine to run, and observe the operation of the leather; 2. If the belt is in the middle of the tray, it is a normal state, and no adjustment is required; 3. If the belt deviates to the left, the following adjustments can be made: A. The left belt can be 'tightenedObserve while adjusting until the belt returns to the center position. If you find that the adjusting nut is too tight, do not force the adjustment. B. The belt on the right can be 'looseObserve while adjusting until the belt returns to the center position. C. If the deviation is relatively large, it is difficult to adjust slowly and it is difficult to return, you can quickly loosen the belt on the right. D. If the belt has rubbed against the side baffle, it should be stopped immediately for inspection. We focus on the production, research, development and after-sales of weighing equipment! Thank you for reading, if you have any comments and suggestions, you can click on the contact information or leave us a message, and you will get a satisfactory answer! In addition, we can also customize a sorting machine for you according to your needs! If you are interested, please contact us and our staff will answer you!