Inspection and adjustment method of glutinous rice flour packaging machine before use
All parts of the glutinous rice flour packaging machine equipment have been adjusted before leaving the factory. However, during shipping and handling, the fasteners may loosen and cause changes in orientation. In addition, the relevant parts need to be adjusted when replacing the filler parts. Therefore, the machine should be checked and adjusted as follows before the official use: Switch adjustment: The sensitivity of the switch has been adjusted before leaving the factory. If you feel unsuitable, you can adjust it yourself. Press the 【SET】key on the keyboard to make bSZ appear in the left window, use a screwdriver to rotate the screw at the rear of the photoelectric switch, and at the same time cover the photoelectric switch with your hand, at this time, the red light will be on until the distance is suitable, press the 【Exit】 key to Working conditions. Adjustment of the position of the scraper: When replacing the screw, the stirring scraper should be adjusted, and the position of the scraper from the screw is usually about 20 mm. When adjusting, loosen the scraper screw and tighten the scraper screw when pulling up or pushing the scraper to a suitable position. Adjustment of the height of the screw: Put the cup on the screw to investigate the position of the bottom of the screw, and the bottom is about 2 mm from the inner edge of the bottom of the cup. When adjusting, open the investigation window on the right side of the hopper cover, loosen the adjusting shaft screw, fix the material cup evenly with three cup screws, hold the adjusting shaft by hand to move up and down, and tighten the adjusting shaft screw when the screw height is suitable.
If you are sourcing for product development or manufacturing operations, you won't miss Guangdong Kenwei Intellectualized Machinery Co.,LTD.'s list of offer.
All of the experts Guangdong Kenwei Intellectualized Machinery Co.,LTD. consulted stressed that the best recovery plans are the ones made before you need them, not afterward.
Simultaneously being able to offer not only the product but also the service, gives the customer a quality 'one-stop-shop' service.
The proprietor has many years experience in providing promotion services and is a sought after expert in weigher.
The same determination is critical for business owners. The journey in weigher business is both a challenging and rewarding experience.