How to solve the problem that the labeling position of the weighing labeling machine is unstable? Checkweigher, Checkweigher, Weighing and labeling machine
Food can be said to be inseparable from our lives, and it can be seen everywhere around us, which has promoted the continuous rise of the weighing and labeling machine industry. The higher it is, it is naturally developed by automation companies. There is no need to manually complete the labeling work. Only technicians need to maintain and manage the equipment, and they can cooperate with the automated production line for automated production. The weighing labeling machine is suitable for labeling the circumference and neck of round bottle objects. It can be single label and double label on the bottle body. The distance between the front and back double labels can be adjusted flexibly. In addition, the neck label can be positioned and labelled. It is widely used in pre-adjustment. Wine, cocktail, beer, ice wine and other industries. Optional color matching tape printer and inkjet printer can print the production date and batch number information on the label, and realize the integration of labeling and coding. The following editor will share with you the reasons and solutions for the unstable labeling position of the weighing and labeling machine: 1. The belt pressing device may not be pressed tightly, resulting in loose labeling and inaccurate detection by the electric eye. Squeeze the label to solve. 2. It is possible that the traction mechanism slips or is not pressed tightly, so that the bottom paper cannot be taken away smoothly. Press the traction mechanism to solve the problem. If it is too tight, the label will be pulled, so it is better to be able to pull the bottom paper normally. Usually if the backing paper is wrinkled when pulled out, it should be too tight. 3. The shape or positioning of the object to be pasted is different. This requires control of product quality to solve. 4. The object to be attached should be placed in parallel with the labeling direction of the horizontal labeling machine (pay attention to whether the product moves during the labeling process, and the support rod on the left can be appropriately raised a little higher than the right.) 5. The object to be attached The labeling station should ensure smooth rotation (be careful not to touch the peeling plate). When the object is too light, it should be put down and pressed against the object to be pasted. 6. When the equipment is in the double-label state, a single label is issued: (1) After the single label is issued, the workpiece keeps rotating because there is no delay set for the two labels, and the machine is in a state of waiting for the labeling signal of the two labels. (2) After a single label is issued, the workpiece stops. It is because there is signal interference in the target measuring electric eye (reset the electric eye) or the delay control is abnormal. I hope the above content can help you better understand this labeling machine.