How to Prevent Checkweigher Belt Tear Problems
The maintenance of the sorting weigheris not only the fuselage but also the various conveying accessories. The protection of the accessories conveyor belt is very important. If the accessory conveyor belt is torn longitudinally due to common faults, the loss will be huge. For this reason, today The editor will tell you how to prevent the tearing of the conveyor belt of the sorting scale. The conveyor belt of the sorting weighergenerally does not tear longitudinally during normal operation. Only when the conveyor belt is seriously deviated is external sharp objects, such as iron wire fragments, iron nails, friction sharp objects, etc. It is very likely that the conveyor belt will be damaged, or torn in severe cases. Longitudinal damage or tearing of the sorting scale must be clear about the source of the damage or tearing of the conveyor belt, and then effective measures should be taken in a targeted manner, and the protection device should be improved. Only in this way can the sorting scale be avoided to the greatest extent. Longitudinal breakage or tearing during operation. The longitudinal tear of the sorting weighergenerally occurs at the loading point of the conveyor. The reasons for the longitudinal tear of the conveyor belt can be divided into several categories. Foreign objects such as sharp tools with friction properties and long pieces of wood pierce the conveyor belt and get stuck in the funnel chute. On the conveyor frame or idler, and the conveyor belt runs with the forward speed of the equipment, the belt is scratched by foreign objects. When these foreign objects fall, they are stuck in the coal drop funnel or chute. Under the action of coal pressure in the funnel or chute and the frictional force of the belt, these foreign objects continue to rub, scratch and press the conveyor belt, and the more they get stuck, the tighter they become. The pressure on the conveyor belt is also increasing, so that the scratches on the conveyor belt are rapidly deepened, and finally the conveyor belt is pierced and the conveyor belt that is running fast is torn. Therefore, when we find that the equipment belt deviates, we should check whether there is any residue between the equipment transmission belts that hinders the normal operation of the weighing belt and reduces unnecessary wear and tear of the equipment.
However, weigher isn't the only producer in domestic, and many people feel that Guangdong Kenwei Intellectualized Machinery Co.,LTD.'s service leaves much to be desired in terms of functionality and design.
Guangdong Kenwei Intellectualized Machinery Co.,LTD. is proud to be recognized as some of the most important and influential providers for global customers.Visit us at Kenwei Multihead weighers.
Guangdong Kenwei Intellectualized Machinery Co.,LTD. are trained to think about problems and coming up with solutions, as well as presenting the whole idea in a logical and coherent manner.