How to maintain weightlessness scale?

Along with technological independent innovation, many products will be upgraded. Some of the industrial equipment that you use today is all made after a long period of meticulous creation. This will greatly assist you in some production and manufacturing themed activities. For example, the emergence of weightlessness scales, so it must be maintained on time. Regular maintenance of the weightless scale parts, carried out once a month, to check whether part of the theme activities such as worm gears, worms, anchor bolts on the lubricating block, rolling bearings, etc. is not flexible and damaged. Any shortcomings should be repaired immediately. Do not make do with it. . The weightlessness scale should be used in a dry clean room, and should not be used in places where erythorbic acid and other vapor products that are corrosive to the human body are circulated in the air. When the drum shakes from side to side while working, please calibrate the screws on the front roller bearing to a proper place. If the shaft sleeve shakes, please calibrate the screws on the back of the rolling bearing frame to a moderate position, adjust the gap so that the rolling bearing does not make a noise, turn the belt pulley by hand, and tighten it appropriately. Too tight or too loose can cause damage to the equipment. may. After the application of the weightlessness scale is over or when it is terminated, the rotating drum should be removed to clean up and brush the remaining powder in the bucket, and then installed properly, fully preparing for the next application. If you stop using it for a long time, be sure to wipe the whole body up and down of the weightlessness scale, coat the bright surface of the part with anti-rust agent, and cover it with a cloth.