How to maintain the weight sensor on the automatic sorting scale

Every weighing system must have a weight sensor. The quality of a weighing system depends on whether a high-quality weight sensor is used. The weight sensor is the key position of the weighing system and needs to be properly maintained. Here is an introduction to everyone on how to maintain the weight sensor on the automatic sorting scale. The weight sensor on the automatic sorting scale is a very critical component of the net weight sorting machine. Its function is mainly used to measure the net weight of the object to be screened and convert it into an output data signal. Based on the connection with the electronic computer, it can carry out automatic technology, integration and intelligent system precise measurement and operation of the objects to be screened. This is the material that combines contemporary accurate measurement technology with electronic computer technology. The tension pressure sensor of the sorting scale is a very high-precision component, so we must maintain the tension pressure sensor in addition to the maintenance of the net weight sorting machine. The tension and pressure sensor is generally installed in the audience side of the sorting machine scale. When the raw materials on the transmission belt go through the net weight selection machine scale body, the net weight of the raw materials is transferred to the load cell through the weighing structure. The load cell obtains the working voltage data signal, and the sensor measures and transmits it to the system software control board. After the system software control board measures and calculates, the instantaneous speed net weight of the raw materials and the total compliance rate are obtained. It can be seen that the maintenance of the pull pressure sensor is very important. During the whole application process, 1. Every day after the machine is shut down, the raw materials on the sensor of the net weight sorting machine must be immediately removed to prevent the long-term load of the raw materials from jeopardizing the precision of the sensor and the accuracy of the inspection. 2. All components must be tightened on time to prevent the natural environment with large electromagnetic fields and obvious heat transfer to prevent influence. 3. You must also clean up the dust on the machinery and equipment on time and maintain the cleanliness of the machinery and equipment in order to prevent damage to the inspection of the net weight of each component of the net weight sorting machine.