How to clean the sorting scale better
With more and more intelligent production life, sorting scales have been used in major production industries. The use of sorting scales greatly helps to improve production efficiency and is a good helper for human industry. But because the sorting scale is not used for a long time, it will cause stains on the surface of the machine, so people need to clean the sorting scale as necessary. The following editor will introduce you the detailed steps of cleaning the sorting scale. 1. Clean the sorting scale: After cutting off the power of the sorting scale, unplug the power cord. Soak the gauze and wring it dry, then immerse it in a small amount of neutral cleaning liquid (such as alcohol), and then use it to clean the weighing pan, displaying the filter and other parts of the weighing body. Conveyor parts that are easy to handle can be cleaned with warm water. Wash with warm water at about 45°C once a week. Soak the conveyor belt of the sorting scale in boiling water for about 5 minutes. 2. Cleaning the main body of the sorting scale: 1. The power supply must be cut off to prevent the danger of electric shock, and then the weight separator can be cleaned. 2. Choose cleaning tools. Please use water or a cloth dipped in neutral detergent for cleaning. 3. Please do not use thinner, benzene and other organic solvents to avoid corrosion of objects and bodies, which may affect the use. 4. Do not use metal brushes to prevent scratches Object and body 3. Clean the printer of the sorting scale (provided that the device is equipped with a printer): cut off the power, open the plastic door on the right side of the scale body, hold the plum handle outside the printer, and then drag the printer out of the scale body. According to the front of the printer, loosen the print head, use a scaled attachment to gently wipe the print head on the special print head cleaning pen, take out and wipe off the cleaning fluid that will cover the pen cap to volatilize, then wait for two minutes, and then wait for the print head The cleaning fluid evaporates fully, then close the print head to restore the balance of the printer, close the plastic door, and conduct an electrical test. It can be used normally after printing. 4. Maintenance of the sorting scale: 1. The pollution caused by touch and fingerprints can not be completely removed with neutral detergent or soap. It can be wiped with a sponge or cloth containing organic solvents (alcohol, gasoline, acetone, etc.) 2. If you can’t use a neutral detergent to remove the rust caused by the adhesion of the detergent, please use a cleaning solution. 3. During the operation of the machine, the rust caused by iron powder or salt can be used with a sponge or a neutral detergent or soapy water. Wipe with a cloth, it is easy to clean up.