How to clean and maintain the conveyor belt of the metal detector?
Metal detectors, also known as metal detectors, metal detectors, metal detectors and other metal detectors, often require maintenance during daily use, especially the conveyor belt of the metal detector, otherwise the pollution will remain on the conveyor belt during use. Substances or metal impurities have a great influence on the detection accuracy. So, how to clean and maintain the conveyor belt of the metal detector? Next, Zhongshan Kenwei will share with you the cleaning method and precautions of the conveyor belt of the needle detector: 1. Cleaning tools: Find a clean towel and wet it with water. Wring out until no more water can be squeezed out. 2. Clean the surface of the conveyor belt: the sensitivity of the metal detector should be adjusted to the lowest level before cleaning, so as not to affect the subsequent cleaning work due to excessive sensitivity. Then straighten the towel and press it properly on the surface of the conveyor belt, start the metal detector, make the machine run for more than five laps (the purpose is to clean the pollutants on the surface of the conveyor belt, the method can be applied flexibly), then wash the towel and twist it. Dry, repeat this step again to wipe the conveyor belt until there is no obvious contamination on the surface of the conveyor belt; 3. Clean the back of the conveyor belt: many people ignore the back during the cleaning process, but cleaning the back is also very important, and then wash the towel Clean and wring it out, pass the towel through the bottom of the conveyor belt from the lower part of the machine, straighten the towel, and draw the towel to the front of the conveyor table, hold the towel at both ends, and start the machine to run the machine for several weeks. Since the bottom of the conveyor belt is the dirtiest place, it needs to be wiped several times. After every few weeks of operation, remove the towel and wash it again and repeat the above steps. 4. How to judge the cleaning effect: After the conveyor belt of the metal detector goes through the above two cleaning steps, adjust the sensitivity to level 8 or the highest sensitivity, start the machine, and let the machine run, if the machine runs smoothly and the probe metal position display light is off At this time, put clothes without any metal impurities at this time, and the product can pass through the metal detector channel smoothly, that is, the conveyor belt is cleaned successfully! The cleaning of the conveyor belt of the metal detector is not very complicated work, but it needs to be diligent in cleaning and maintenance. In this way, the detection accuracy of the needle detector and the service life of the equipment can be better guaranteed. At present, Zhongshan Kenwei has a variety of metal detector equipment, which can meet the needs of metal detection in different fields! Our company welcomes friends who are interested in buying and understanding, feel free to click here to contact us for more information!
Guangdong Kenwei Intellectualized Machinery Co.,LTD. will continue to build a corporate culture that respects and values the unique strengths and cultural differences of our associates, customers and community.
You can count on Guangdong Kenwei Intellectualized Machinery Co.,LTD. to be your one stop shopping site for most of the quality products you are searching for. We strive to offer a wide variety of products for you to learn about and to purchase.
First, in sparking the initial idea for a company based on manufacturing technology; and second, in designing a solution that could meet a clear market need for solving issues related to weigher linear weigher.
Guangdong Kenwei Intellectualized Machinery Co.,LTD. is a new company that provides expertise in search marketing solutions for business on a worldwide basis.