How do I know the common faults and solutions of the net weight checkweigher?
The automatic net weight checkweigher machine is the automatic net weight inspection on the assembly line, the identification of the left and right production lines, or the classification and selection of the net weight. There may be some common faults during the whole application process. How should I deal with them by myself? 1) Does the net weight automatic checkweigher weigh? Solution: 1. Check if other objects are touching the weighing tray; 2. Whether the machine equipment has been calibrated and whether it can be calibrated again; 3. Whether the machine equipment has wind blowing gently; 4. Relatively static data Are weighing and dynamic weighing the same? If they are inconsistent, they can be corrected based on dynamic learning and training. 2) Is the automatic checkweigher removal equipment not working? Solution: 1. First check whether the switching power supply connection is normal; 2. If the switching power supply is normal, click on the rejected port number that matches in the common fault detection to see if it is working; 3. If there is no posture, check In the rejection port number, is the appropriate rejection port number selected? 3) Is the static data weighing of the net weight checkweigher inconsistent with the dynamic weighing? Solution: When the net weight of the object is in static data and winter conditions, there is a deviation in the weighing result, which can be adjusted according to dynamic learning and training. 4) The conveyor belt of the net weight checkweigher does not work? Solution: 1. When all the conveyor belts are not working; check the switching power supply; 2. When one or several sections are not working; check the pros and cons of the motor drive according to the adjustment of the motor and the controller; 5) automatic check weighing of the net weight Difficulties in weighing conveyor belts. Solution: 1. If you find abnormal actual operation or precision and speed errors, please check whether the parts conveyor belt is cracked; 2. Check whether the conveyor belt is offset. If there is a tilt, adjust the adjustment equipment on both sides until the transmission belt is not tilted; 6) The precision and speed of the automatic checkweigher for net weight. Solution: 1. Check if the conveyor belt is cracked or inclined. If such a problem occurs, please disassemble or adjust the conveyor belt to all normal parts before testing; 2. Check the operation panel to see if the basic parameters are appropriate; for basic parameter problems, set the values u200bu200bthat must be set again according to the guide. Apply the tested product 10 times to check whether the precision is stable;
Guangdong Kenwei Intellectualized Machinery Co.,LTD. is devoted to satisfy our customers with a wide array of the finest using experience.
If you want to know more about finding the proper for multihead weigher packing machine solutions, visit Kenwei Multihead weighers.
We want to be careful and deliberate about developing Kenwei, from the platform we choose, to the way we approach it, to the methods we use.