Hazardous spices weighing instrument elements
Using a seasoning weighing instrument to weigh the total number and total flow of dry and loose seasonings has the following benefits: not only can accurately measure different volumes of seasonings, but also weighing can accurately measure the total number of seasonings without the need to calibrate the bulk density of the seasonings. The weighing does not need to touch the seasoning, making it suitable for accurately measuring corrosive seasoning and operating in a corrosive environment. This is also a generally accepted way to quantitatively analyze the sales of packaged goods. So, which aspects will harm the seasoning weighing instrument scale, can actually look at it based on this article. The water entering the terminal of the weighing equipment will lead to the cable of each weight sensor and reduce the capacitor in the middle of the power cord. This will cause the weight sensor encouragement wire (the wire that transmits electromagnetic energy to the module) to couple with the power wire (the wire that transmits the data signal to the terminal), resulting in electrical noise that can harm the accuracy of weighing. If there is water in your natural environment, you should also use a weight sensor that is airtight in both the strain gauge area and the cable entrance. The strain gauge area should be turned off by electric welding, and the cable inlet is very easy to get damp; because the water will be wicked by the cable, there should be an electric welding part, which contains a laminated glass to the metal material sealing connector. A weight sensor that bears a large temperature change or the distance from the terminal to the net weight control board exceeds 50 feet will be subject to temperature fluctuations, which can cause changes in the resistance of the cable. This is likely to cause encouragement to change, which will result in changes in the weight sensor data signal. In order to avoid this temperature problem, a six-wire weight sensor cable can be used. The weight sensor cable allows the weighing controller to perform proportional readings on the weight sensor data signal, while ignoring the changes caused by encouraging changes.