Daily maintenance method of granule packaging machine
Granular packaging machines are generally used to package powder and granular materials with good fluidity. This machine is suitable for granular materials in food industry, tea, medicine, chemical industry, daily chemical, hardware and other industries. Any machine needs regular maintenance. The maintenance of the granule packaging machine is roughly as follows, which can be used as a reference: Lubrication of the machine parts 1. The box part of the machine is equipped with an oil gauge. It should be refueled once before driving, and the temperature rise of each bearing can be adjusted in the middle. Add to it the situation and operating conditions. 2. The worm gear box must store oil for a long time. The oil level is such that the worm gear penetrates into the oil. If it is used frequently, it must be replaced with new oil every three months. There is an oil plug at the bottom of the tank for draining oil. 3. When the machine is refueling, do not let the oil spill out of the cup, let alone flow around the machine and on the ground. Because oil is easy to contaminate materials and affect product quality. Maintenance Instructions 1. Regularly check the parts, once a month, check the worm gear, worm, bolts on the lubricating block, bearings and other moving parts for flexible rotation and wear. If defects are found, they should be repaired in time, and should not be used reluctantly. 2. The machine should be used in a dry and clean room, and should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body. 3. After the machine is used or stopped, the rotating drum should be taken out for cleaning and the remaining powder in the bucket should be cleaned, and then installed to prepare for the next use. 4. When the drum moves back and forth during work, please adjust the M10 screw on the front bearing to the proper position. If the gear shaft moves, please adjust the M10 screw behind the bearing frame to the appropriate position, adjust the clearance so that the bearing does not make noise, turn the pulley by hand, and the tightness is appropriate. Too tight or too loose can cause damage to the machine. . 5. If the machine is not used for a long time, the whole body of the machine must be wiped clean, and the smooth surface of the machine parts should be coated with anti-rust oil and covered with a cloth. The machine needs maintenance, and the operator should use the machine correctly and clean it regularly during use. The article comes from China Food Machinery Equipment Network
Guangdong Kenwei Intellectualized Machinery Co.,LTD. is one of the world’s leading and most-trusted suppliers to the relevant markets.
Guangdong Kenwei Intellectualized Machinery Co.,LTD. assures you that you will be satisfied with its results and humbly request you to try this. We are hoping for a better business deal with you.
weigher has a great positive reflects from our dear customers.
Offering a loyalty program not only makes customers feel valued, but it allows Guangdong Kenwei Intellectualized Machinery Co.,LTD. to easily collect important information about customers.
People tend to want what they perceive they cannot have. Making Kenwei seems exclusive or as if it will go out of stock if they don't act quickly often makes it more enticing to the consumer and increases the likelihood that they will buy in.