Daily cleaning of the weight sorter

Cleaning of the conveyor belt of the weight sorter 1. The conveyor belt that is easy to assemble and disassemble can be cleaned with warm water. Wash it once a week with warm water at 45°C and soak the conveyor belt in boiling water for about 5 minutes. 2. It can also be soaked in hypochlorous acid solution (200ppm) for 2 minutes, and then rinsed with water. Either way, drain the cleaned belt completely before installing it on the belt. If the drainage is insufficient, it will grow mold if installed on a conveyor belt. In addition, after using neutral detergent or hypochlorous acid aqueous solution, please wash thoroughly with clean water. If used with residual cleaning fluids, it may cause premature belt ageing, affecting the use of the equipment. Secondly, the main part of the weight sorter is clean. 1. The power supply must be cut off to prevent the danger of electric shock, and then the weight detector can be cleaned. 2. When choosing a cleaning tool, please use a cloth soaked in water or neutral detergent for cleaning. 3. Do not use thinners, benzene and other organic solvents, so as not to corrode objects and organisms and affect their use. 4. Do not use a metal brush to avoid scratching objects and the body. Maintenance of the weight sorter 1. When the pollution caused by touch and fingerprints cannot be completely removed with neutral detergent and soap, it can be wiped with a sponge or a cloth containing organic solvents (alcohol, gasoline, acetone, etc.). ).). 2. If the rust caused by the adhesion of the detergent cannot be removed with a neutral detergent, please use a cleaning solution. 3. Rust caused by iron powder or salt can be easily removed by wiping with a sponge or cloth containing neutral detergent or soapy water.