Correct maintenance of semi-automatic pellet measuring cup packaging machine
Before using the semi-automatic particle measuring cup packaging machine normally, the operator should add lubricating oil (food grade lubricating oil) to the cam and bevel gear once per shift. This machine firstly folds a roll of packaging film in half by the bag maker through the paper holder, roller, control rod. It is sealed by the heat sealer, and then driven by the roller to the cutter equipment for cutting, and finally sent out by the conveyor belt. Preparations before starting up: First, check the entire equipment of the semi-automatic particle measuring cup packaging machine. Turn the main motor belt by hand to see if the machine rotates flexibly. Only after the confirmation is correct can the power be turned on. Turn on the power switch, the power indicator lights up. Install the packaging material between the two paper stop rollers, and place it in the groove of the paper support arm board of the machine. Adjust the paper stop roller and clamp the packaging material so that the packaging material is aligned with the bag maker, and then tighten the top wire. , Pull the packaging material into the bag maker, and pull it to the cutter device through the roller. The main shaft and the conjoined hollow shaft are made of alloy structural steel imported from Germany after water forging, rough turning, heat treatment, fine turning and fine grinding. The structure is reasonable and the hardness is uniform, which improves the fatigue resistance and wear resistance of the parts, and provides safe operation. More reliable protection. The pellet packaging machine adopts high-precision involute cylindrical helical gears for direct transmission. The transmission gear tooth blanks are water-forged and then normalized heat treatment, which improves the hardness of the tooth surface; the tooth surface is carburized, and the carburized layer is as deep as 2.4 mm enhances the wear resistance and prolongs the service life of the parts; the hard tooth surface is processed by the silent fine grinding and edge trimming process.
come in many forms, like linear weigher and multihead weigher packing machine, and they all provide efficient solution for our linear weigher needs.
For many years, Guangdong Kenwei Intellectualized Machinery Co.,LTD. has searched for and found a number of secrets to help you multihead weigher packing machine. Go to Kenwei Multihead weighers to learn about some of those secrets.
Loyalty programs provide an opportunity to learn the preferences of customers and design communication strategies that will resonate with weigher.