Cleaning steps of sorting scale
The cleaning steps of the sorting scale: As production and life become more and more intelligent, the sorting scale is used in major production industries. The use of the sorting scale greatly helps to carry out more efficient production and is a powerful helper in the human industry. However, as the sorting scale is not used for a long time, stains remain on the surface of the machine, so people need to clean the sorting scale as necessary. The following editor introduces the detailed steps of cleaning the sorting scale. 1. Clean the sorting scale and weighing platform: After cutting off the power of the sorting scale, unplug the power cord. Soak the gauze and wring it dry, then dip a little neutral cleaning fluid (such as alcohol), use it to clean the weighing pan, display filter and other parts of the weighing body. The conveyor belt that can be easily loaded and unloaded can be cleaned with warm water. Clean weekly with warm water of about 45℃, soak the conveyor belt of the sorting scale in boiling water for about 5 minutes 2. Clean the main body of the sorting scale: 1. The power supply must be cut off to prevent the danger of electric shock, and then the weight sorting machine can be cleaned. 2. Choose cleaning utensils. Please use a cloth moistened with water or neutral detergent for cleaning. 3. Do not use organic solvents such as thinner and benzene—to prevent corrosion to objects and the body, affecting use. 4. Do not use metal brushes. Prevent scratches to objects and the body 3. Cleaning of the sorting scale printer (if the equipment is equipped with a printer): cut off the power, open the plastic door on the right side of the scale body, hold the plum blossom handle on the outside of the printer, and drag the printer out of the scale body. Press the front of the printer, loosen the print head, and gently wipe the print head with the print head cleaning pen attached to the scale attachment. After wiping, cover the cap on the pen to prevent the cleaning fluid from evaporating, and then wait for two minutes to clean the print head. After the liquid evaporates, close the print head, push the printer back into the scale body, close the plastic door, power on and test, and it can be used normally after the printing is clear. Fourth, the maintenance of the sorting scale: 1. The pollution caused by touch and fingerprints, etc., can be completely removed with neutral detergent or soap, and can be wiped with a sponge or cloth containing organic solvents (alcohol, gasoline, acetone, etc.) 2. If the rust caused by the adhesion of the cleaning agent cannot be removed with a neutral detergent, please use a cleaning solution. 3. The rust caused by iron powder or salt during the operation of the machine can be washed with a neutral detergent. Wipe with a sponge or cloth with soap or soap, it can be easily removed and wiped clean