Cleaning steps and methods of sorting scale
The sorting scale is a kind of main equipment on the assembly line of modern production workshops. It is used in the fields of medicine, industry, food and so on. The birth of the sorting scale has greatly improved production efficiency and is indispensable for improving production. However, as the sorting scale is not used for a long time, stains will remain on the surface of the machine, so people need to clean the sorting scale as necessary. Today, the editor of Guangdong kenweigh will come to everyone to see how to clean the sorting scale. ●Clean the scale of the sorting scale: after cutting off the power of the sorting scale, unplug the power cord. Soak the gauze and wring it dry, then dip a little neutral cleaning liquid (such as alcohol), use it to clean the weighing pan, display filter and other parts of the weighing body. The conveyor belt that can be easily loaded and unloaded can be cleaned with warm water. Clean with warm water of about 45℃ once a week, and soak the conveyor belt of the sorting scale in boiling water for about 5 minutes. ●Partial cleaning of the sorting scale: 1. The power supply must be cut off to prevent the danger of electric shock, and then the weight sorting machine can be cleaned. 2. Choose cleaning utensils. Please use a cloth moistened with water or neutral detergent for cleaning. 3. Do not use organic solvents such as thinner and benzene to prevent corrosion of objects and the body, affecting the use. 4. Do not use metal brushes to prevent Scratches on objects and body ● Cleaning of sorting scale printer (if the equipment is equipped with a printer): cut off the power, open the plastic door on the right side of the scale body, hold the plum blossom handle on the outside of the printer, and drag the printer out of the scale body. Press the front of the printer, loosen the print head, and gently wipe the print head with the special print head cleaning pen attached to the scale accessory. After cleaning and wiping, cover the pen cap to prevent the cleaning fluid from evaporating in the pen, and then wait two minutes for the print head After the upper cleaning fluid is fully evaporated, close the print head, push the printer back into the scale body, close the plastic door, power on and test, and you can use it normally after the print is clear. ●Maintenance of the sorting scale: 1. When the pollution caused by touch and fingerprints can not be completely removed with neutral detergent or soap, it can be wiped with a sponge or cloth containing organic solvents (alcohol, gasoline, acetone, etc.) 2 、If the rust caused by the adhesion of the cleaning agent cannot be removed with a neutral detergent, please use the cleaning solution. 3. The rust caused by iron powder or salt during the operation of the machine can be washed with a neutral detergent. It can be easily removed and wiped clean with a sponge or cloth using soap or soapy water. The above is the relevant methods for cleaning and maintenance of the sorting scale shared by the editor, I hope it will be helpful to everyone.