Checkweigher daily maintenance tips, let's learn about it
Checkweighers are widely used in automatic checkweighing equipment for production lines in the pharmaceutical, food, chemical and other industries. Overweight and underweight unqualified products in the production line can be detected online in real time. Checkweigher maintenance has a coup: 1. Cleaning the scale body Turn off the power and unplug the power cord. Wet the gauze, wring it dry, and then dip it in a little neutral cleaning solution to clean the weighing pan, display filter and other parts of the weighing body. Note: Do not use chemical solvents for cleaning, avoid splashing water into the scale body during the cleaning process. damage equipment. 2. Horizontal adjustment Check whether the scale body is normal. If it is inclined, please adjust the scale feet so that the blisters are placed in the center. 3. Cleaning the printer Cut off the power, open the plastic door on the right side of the scale body, hold the plum blossom handle on the outside of the printer, and drag the printer out of the scale body. Press the spring at the front of the printer, release the print head, and gently wipe the print head with the print head cleaning pen included in the scale accessory. After wiping, cover the pen cap to prevent the cleaning liquid in the pen from volatilizing, and then wait for two minutes. , After the cleaning liquid on the print head volatilizes, close the print head, push the printer back into the scale, close the plastic door, power on and test, and it can be used normally after the print is clear. Note: The cleaning pen that comes with the scale must be used to clean the print head. If the cleaning solution in the cleaning pen is used up, you can find some clean soft cloth and dip it in a little anhydrous alcohol to wipe it. Do not use other cleaning fluids or wipe the print head with hard objects, otherwise the print head will be damaged. 4. The initialized bar code electronic scale has the functions of zero tracking and power-on clearing. If there is foreign matter on the weighing pan when the power is turned on, the scale is turned on when there is no wind around. If there is a little weight display after power-on, you can press the reset button on the keyboard to restore the scale to zero. During the weighing process, there should be no foreign objects around the scale touching the weighing pan, and the bottom of the weighing pan should also be clean and free of foreign objects, otherwise it may cause problems such as inaccurate weighing.