Cause analysis of common problems of automatic checkweigher
The scope of use of automatic checkweighers is now wider and wider. With the widespread use of automatic checkweighers, more and more users realize the benefits of automatic checkweighers, but the automatic checkweighers have been used for a long time. There will inevitably be some malfunctions. For this reason, don’t worry, we can try to analyze it ourselves and find out the reason. Today, the editor will tell you about the analysis of the common problems of the automatic checkweigher machine. I hope you can read this article carefully and bring you some help. Analysis of common failure causes of automatic checkweigher machine: 1) Why is the equipment inaccurate in weighing? A. Check whether other items touch the weighing tray; B. Whether the equipment is calibrated and can be re-calibrated; C. Whether there is wind blowing against the equipment; D. Compare whether static weighing and dynamic weighing are consistent, if not consistent It can be corrected by dynamic learning. 2) The rejection device does not work? A. First check whether the power supply is connected normally; B. The power supply is normal, and then click the corresponding reject port in the fault detection to see if it is active; C. If it does not work, check whether the correct reject port is selected in the reject port. 3) The static weighing is inconsistent with the dynamic weighing? The weight of the object is in the static state and the winter state, the weighing result itself has an error, which can be corrected by dynamic learning. 4) The conveyor belt is not running? A. When all the conveyor belts are not running: check the power supply; B. When one or two sections are not running: check whether the motor is driven by the motor and the driver. 5) The conveyor belt problem 1) If If the equipment has abnormal operation or deviations in accuracy and speed, please check whether the consumable parts conveyor belt is cracked; 2) Check that the conveyor belt has no deflection. If there is deflection, adjust the adjustment devices on both sides until the belt has no deflection; 6) Accuracy and speed problems 1) Check whether the conveyor belt is cracked or deflected. For such problems, you can replace or adjust the conveyor belt to the normal position before testing; 2) Check the operation interface to see if the parameter setting is correct; the parameter setting problem , You can reset the value you need to set according to the manual, and perform 10 times with the actual product to check whether the accuracy is stable; 7) After disassembling or inspecting the equipment, correctly reset the connectors and parts disassembled for inspection. Please reset it correctly. 8) Failures caused by non-equipment factors, sudden environmental changes, power supply abnormalities caused by lightning or abnormal voltages, machine drops, shocks, and direct accidents that are not caused by normal use, it is necessary to conduct a comprehensive inspection. Regular maintenance can not only save costs, but also make production work normally.
Maintaining multihead weigher packing machine is not as easy as it may seem. You have to do plenty of important tasks. So cruel is the truth unless you've got a to help you.
For more tips and strategies on effective linear weigher solutions, get your choice at Kenwei Multihead weighers.
The lower cost of weigher, compared to other product, and Guangdong Kenwei Intellectualized Machinery Co.,LTD.’s services provide may well suit the needs for customers.