Automatic granule packaging machine operation process
1. If the conveyor belt rotates clockwise, it should be stopped immediately. At this time, the main motor is reversed, and the motor is reversed to make the belt rotate counterclockwise. 2. Pull the main motor belt by hand to see if the automatic granule packaging machine runs flexibly. After confirming that there is no abnormality in the automatic granule packaging machine, it can be powered on. 3. Under the automatic granule packaging machine, install the packaging material between the two paper blocking wheels, and place it in the groove of the paper support arm board of the automatic granule packaging machine. The paper blocking wheel should clamp the core of the loaded material, so that the Align the packaging material with the bag maker, then tighten the knob on the stopper sleeve, and ensure that the printed side is facing forward or the composite side (ie, the polyethylene side) is facing back. After the machine is turned on, adjust the axial position of the packaging material on the paper roll according to the paper feeding situation to ensure normal paper feeding. 4. Set the temperature. According to the packaging materials used, set the heat sealing temperature on the temperature controller of the electric control box. 5. Adjustment of bag length Put the packaging material into the bag maker according to the relevant regulations, clamp it between two rollers, turn the roller, and pull the packaging material below the cutter. After reaching the set temperature for 2 minutes, turn on the start switch. Loosen the lock nut of the bag length adjusting screw, adjust the hand button of the bag length controller, turn clockwise to shorten the bag length, and vice versa. After reaching the required bag length, tighten the nut. 6. Before starting the granule packaging machine, check whether the specifications of the installed container and bag maker meet the requirements. 7. Turn on the main power switch of the granule packaging machine, press the clutch handle to separate the metering mechanism from the main drive, turn on the start switch, and the machine runs idly.
Guangdong Kenwei Intellectualized Machinery Co.,LTD. is dedicated to servicing our customers with a wide array of high-quality service and products.
should only be created by the very best weigher companies with the training, experience and know how about what is expected of them.
The development of linear weigher weigher products has massive potential for expansion.
But we do think that reckoning with supply chains of weigher is a really important step. Even super simple switches in material, or sourcing, or shipping, or worker benefits seems like good place to start.
To do that, Guangdong Kenwei Intellectualized Machinery Co.,LTD. will need to make sure our business is listed accurately on as many directories as possible, including technology and quality.