Automated granule packaging machine - what to pay attention to after buying bagged granule packaging equipment
Automatic granule packaging machine - what faults should be paid attention to after purchasing the bagged granule packaging equipment 1: When the color mark tracking is not performed (that is, the photoelectric switch is turned off), the bag length error is large. Reasons: 1. The set value of the bag length of the automatic granule packaging machine is not suitable; 2. The pattern of the roller is smoothed, which reduces the friction force; 3. The pressure of the roller is small. Elimination methods: 1. Increase the set value of the bag length so that the actual bag length is equal to or slightly larger than the standard length of the color code; 2. Replace the roller; 3. Increase the roller pressure. Fault 2: The packaging bag is continuously cut or partially cut, resulting in continuous bags. Reasons: 1. The pressure between the two cutters is too small; 2. The cutting edge becomes dull. Remedy: 1. Adjust the pressure between the cutters of the automatic granule packaging machine; 2. Grind or replace the cutters. Trouble 3: The paper feed motor does not rotate or rotates continuously. Reasons: 1. The paper feed lever is stuck; 2. The paper feed proximity switch is damaged; 3. The starting capacitor is damaged; 4. The fuse is broken. Remedy: 1. Solve the cause of the jam; 2. Replace the paper feed proximity switch; 3. Replace the starting capacitor; 4. Replace the fuse. Fault 4: The heat sealing body of the automatic granule packaging machine does not heat up and the temperature of the heat sealing body is out of control. Reasons: .1. The heating tube is damaged; 2. The circuit is faulty; 3. The fuse is broken; 4. The temperature regulator is damaged; 5. The thermocouple is broken. Remedy: 1. Replace the heating tube of the automatic particle packaging machine; 2. Check the circuit of the automatic particle packaging machine; 3. Replace the fuse; 4. Replace the temperature regulator; 5. Replace the thermocouple. Fault 5: The automatic granule packaging machine does not pull the bag (the motor for pulling the bag does not run). Reasons: 1. Line failure; 2. Damage to the proximity switch of the bag; 3. Failure of the controller of the automatic packaging machine; 4. Failure of the stepper motor driver. Troubleshooting methods: 1. Check the circuit of the automatic granule packaging machine and remove the fault; 2. Replace the proximity switch of the pull bag; 3. Replace the controller of the automatic packaging machine; 4. Replace the stepping motor driver of the automatic granule packaging machine.
Many of us have heard about weigher and seen some of these units in operation in linear weigher, multihead weigher packing machine and linear weigher spaces.
For more information please see our site at Kenwei Multihead weighers. Don't be hesitate to contact us!
Guangdong Kenwei Intellectualized Machinery Co.,LTD. has developed a unique technology with many applications including multihead weigher packing machine.