[Selection scale] How to maintain the selection scale and what are the application ranges of the selection scale

The sorting scale is a kind of equipment used for product sorting. It is mainly used in various automated packaging lines to detect product weight, off-line discrimination or weight classification selection. It is widely used in pharmaceuticals, food, health products, and daily chemicals. , Battery, light industry and other industries online high-speed packaging checkweighing applications. The packaged products are checked by the weighing scale, the qualified ones will be returned to the original conveyor belt, the unqualified ones will be rejected (or alarm shutdown), and the products are classified and counted according to the settings, and the feedback signal is automatically provided to adjust and correct the feeding equipment. , Text display fault alarm information, multiple graphics statistics display and other functions. Maintenance of different scales 1． Clean the scale body and cut off the power, unplug the power cord. Wet the gauze and wring it dry, then dipped a little neutral cleaning liquid, and use it to clean the weighing pan, display filter and other parts of the weighing body. Note: Do not use any chemical solvents for cleaning. Avoid splashing water into the scale body during the cleaning process. If splashing into the scale body accidentally, you must wait for the water to dry before turning on the power, otherwise it may cause electric shock. Or damage the equipment. 2. Level calibration Check whether the scale body is normal. If it is tilted, adjust the feet of the scale so that the blisters are in the center position. 3. Clean the printer and cut off the power, open the plastic door on the right side of the scale body, hold the plum blossom handle on the outside of the printer, and drag the printer out of the scale body. Press the huang piece on the front of the printer, loosen the print head, and gently wipe the print head with the special print head cleaning pen included in the scale accessory to remove the dirt on it. After wiping, cover the pen cap to prevent the cleaning fluid from evaporating in the pen, and then Wait for two minutes. After the cleaning liquid on the print head is fully evaporated, close the print head, push the printer back into the scale body, close the plastic door, power on the test, and it can be used normally after the print is clear. Note: You must use the cleaning pen that comes with the scale to clean the print head. If the cleaning liquid in the cleaning pen is used up, you can find some clean soft cloth, dipped in a little absolute alcohol to wipe it. It is strictly forbidden to use other cleaning fluids or use hard objects to wipe the print head, otherwise it will cause damage to the print head. 4. Initialize the bar code electronic scale with zero tracking and zero reset function at startup. The scale can be turned on to remove foreign objects on the weighing pan to ensure that the scale is turned on when there is no wind around. If there is a little weight display after turning on, you can press the reset button on the keyboard to make the scale Return to zero position. During the weighing process, it should be ensured that no foreign matter around the scale touches the weighing pan, and the bottom of the weighing pan should also be clean and free of foreign matter, otherwise it may cause problems such as inaccurate weighing. The above is about [selection scale] how to maintain the selection scale, and what are the relevant content of the application range of the selection scale recommended by Guangdong kenweigh, the manufacturer of the selection scale. I hope to be helpful.