Kenwei single chain conveyor combination indoor
1. The raw material used in Kenwei conveyor manufacturers is of high quality and has no any strange smell during use.
2. The professional QC team guarantees its quality by following the strict international standards.
3. The product caters to market demand and will be more widely used in the market.
Product Type：JW-D3
1.The machine is for transpoing the finished products products to the check machine and packaging platform .
2.Height :0.6-0.85m
3.convey colume :1mmm/h
4.belt type and chain type are optional
5.customizable
Optional Equipment:
JW-B1 Standard Vertical Weighing And Packaging System
JW-B2 Twin Packaging System
JW-B3 Double Feeding Vertical Packaging System (factory height limited)
JW-B4 Combined Weighing And Packaging Machine With Z Conveyor
JW-B5 Combined Weighing And Packaging Machine With Screw Feeder
JW-B6 Combined Weighing And Packaging Machine With Vacuum Feeder
JW-B7 Economic Linear Weigher With Vertical Packaging Machine System
JW-B26 One Multihead Weigher Mixing Weighing Series
JW-B28 Multiple Units Multihead Weighers Mixing Weighing System
JW-B31 Standard weighing and counting bagging system
JW-B32 Weighing and counting system
Company Features
1. Fully committed to the R&D and production of chain conveyor , Guangdong Kenwei Intellectualized Machinery Co.,LTD. is highly appraised among customers.
2. Kenwei is a company which puts quality first.
3. Sincerity to our customer is the most important in Guangdong Kenwei Intellectualized Machinery Co.,LTD.. Welcome to visit our factory! Through continuous improvement of corporate value, Guangdong Kenwei Intellectualized Machinery Co.,LTD. will realize the goal of conveyor manufacturers . Welcome to visit our factory!
Chain conveyor type material handling devices selling mainly used for conveying various kinds of pulp board, waste paper in bulk and in bundle which can be horizontal conveyor or inclined conveyor(<30°).Intended particularly for loading of waste pape(loose or in bales) or chemical pulp into a pulper.As to the design, basic dimensions and parameters may differ and can be adapted to particular projects. Waste paper (loose or in bales), respectively chemical pulp, is loaded in a hopper and from here conveyed by means of a conveying chain or a band to its discharging point where falling into a pulper chest.
1.Trough plate punch forming which high strength and excellent in crushing effect.
2.Chain board adopts closed design to prevent material leaking.
3.Two rows of idler traction chain and hollow roller shaft,and oil can be injected from pin roll to shaft sleeve and wear-resistant zinc-copper bushing.
4.Two rows of chain adopt long axis to prevent chain running deviation.
5.Chain wheel adopts cast steel to improve wear-resistant.
6.Raw material feeding plate adopts V design( more than effective conveying width 400mm) to improve raw material throughput
7.Orbit type running,operate steadily and reliably, with low friction and low power consumption.
| Type | BFW | |||||||
| Chain plate width(mm) | 1200 | 1400 | 1600 | 1800 | 2000 | 2200 | 2400 | 2600 |
| Feeding capacity(m3/h) | 60-220 | 80-255 | 95-300 | 110-345 | 140-390 | 160-430 | 200-500 | 240-600 |
| Conveying material | Waste paper/Pulp board | |||||||
| Max.limit of material(mm) | 1000 | 1200 | 1400 | 1600 | 1800 | 2000 | 2200 | 2400 |
| Motor power(kw) | 5.5 | 7.5 | 11 | 15 | 18.5 | 22-30 | 30-45 | 37-55 |
1.International package(wooden case,carbon cast and pallet).
1.Proposing the most suitable scheme and equipment for our clients.
2.Designing and fabricating targeted products according to the special requirements of clients.
3.Training periodically high qualified service technician.
1.Assisting our clients for foundation construction of equipment.
2.Dispatching engineers to install and debug equipment.
3.Training the first-line operators on site.
4.Regularly visit clients to solve production problems.
Dear purchasing manager:
Welcome visit our product and I think you must have many question want to know. I enclsed many regular question and answer so that you can understand when I not reply to you on time.
Q1: are you the manufacturer?
A: Yes, we are drag chain manufacturer since 2001. We have ourselves brand AISENTE and also can accept OEM AND ODM
Q2: Can I got a sample from you?
A: Sure, we can supply free sample just need you pay express cost.
Q3: What is your MOQ?
A: Our regular MOQ is 500 pieces. Less than 500 pieces you can choose sample order.
Q4: What is your delivery time?
A: If we have goods in stock we will arrange goods within 15 days, if we not have chain in stock then will depend on your quantity.
Q5: What is your payment term?
A: You can pay by T/T TRADE ASSURANCE western union and LC at sight.
Q6: Can I visit your factory?
A: Welcome vist our factory anytime
Q7: Can I do your agent?
A: Of couse, welcome.