Automatic vertical granule packaging machine cutter

The automatic vertical packaging machine is suitable for packaging non-sticky or a little sticky powder packaging such as puffed food, shrimp strips, peanuts, popcorn, potato chip granules, etc. Packaging requirements of other industries. In the packaging process, the processing method of the cutting fault of the automatic vertical particle packaging machine appears. The multi-head microcomputer combination said that the manufacturer's introduction is as follows: 1. During the operation of the packaging machine, the packaging bag is cut continuously to check whether the sharpness of the cutting knife is not enough, or there is a gap between the horizontal seal and the horizontal seal, so that the two cannot be contacted; 2. When the packaging bag is cut out, it is found that the sawtooth part is partially absent. Check whether the cutter tooth has fallen; 3. After cutting out the packaging bag, it was found that the packaging bag was not aligned right or left, or whether the cutter of the packaging machine was not flat or not installed correctly. 4. When the packaging machine is in operation, it is found that the cutter does not work: 1) Check the screen control panel to see if the control system of the cutter is stopped; 2) Check whether the speed of the cutter start time of the control panel is consistent with the speed of the packaging machine; 3) After tightly closing the horizontal seal, check whether the sensor on the cylinder is faulty, and whether there are related signal instructions; 4) Check whether the circuit control system is connected with wrong wires or circuit problems, whether there are problems with solenoid valves, cylinders, etc.