What should I do if the weighing machine is unable

Pipeline weighing equipment The weighing machine may have various abnormal conditions during long-term operation. What if the weighing machine is unable to weigh? At this time, you need to check the weighing tray (that is, the middle section of the weighing machine), check whether the gasket of the sensor of the device is installed, and the installation position! The following are the steps of the self-test of the common problems of the weighing machine: 1. Disassemble the weighing tray 2. Unscrew the protective screw of the sensor 3. Check if the gasket is installed 4. Check whether the gasket has the corresponding hole 5. After installing the gasket, restore the tray. If the weighing is not normal, return to the operation interface and set the technical parameters again. 6. If the weighing is still not possible after setting the parameters, please call the weighing machine supplier. Note: This usually happens when the weighing machine has just entered the factory and is not installed correctly. We focus on the production, development and after-sales of weighing equipment! Thank you for reading, if you have any comments and suggestions, you can click on the contact information or leave us a message, you will get a satisfactory answer! In addition, we can also tailor a sorting machine for your needs! Please contact us if you are interested, we will have a staff to answer your questions!