Common maintenance and repair methods for automatic

As for automatic packaging scales, I believe that my friends are not unfamiliar. With the needs of social development, our packaging scales have gradually integrated into major industries. Our automatic packaging scales are even more popular. The following is the maintenance and repair of our automatic packaging scales brought to you by our editor: 1. Like other packaging machinery, packaging scales must be regularly maintained and cleaned. When cleaning, the machine must be cleaned from the surface, the bottom plate and the lower mold slide, grooves, upper mold inner pressure plate and positioning rod, etc., the entire machine must be cleaned Keep it clean. 2. The operation should be standardized: Each operation must be performed by pressing the power supply, turning on the power switch, the indicator light is on, and setting the temperature controller to a predetermined temperature, and so on. This can ensure the stable operation of the machine and the normal operation of the machine. Service life. 3. Trouble shooting due to incomplete sealing: The cause of the failure is that the pressure of the cold-pressed rubber wheel is not suitable, the heat-sealing speed is too fast, the heat-sealing temperature is not enough, and the quality of the heat-sealing film is defective. In this case, the heat-sealing temperature can be appropriately increased. , And then reduce the heat sealing speed, while increasing the pressure of the cold-pressed rubber wheel. 4. Coping with thermometer display failure: The main reason for this failure is that the thermometer is broken and must be repaired; the mechanical reason is uneven heat sealing pressure, as long as the pressure spring of the heat sealing knife is adjusted to make the pressure consistent; One reason is that the heat seal quality of the composite material itself is not good, and the heat seal coefficient changes, resulting in inconsistent temperature.