Kenwei is a global professional manufacturer which specialized in weigher packing machines and multi-head weigher machines.

Calibration method of weight sorting scale

by:Kenwei      2020-03-26
Function description of weight sorting scale: The calibration of the scale head can ensure the normal operation of the machine, improve the measurement accuracy and reduce the measurement error. Precautions: Settings for each model: CC002: Weight division value is 9, zui weighing 300, loading weight 200 CC005: Weight division value is 9, zui weighing 600, load weight 500 Before calibrating the scale head, please ensure that the scale value corresponding to each model is large and the weight is correct. If the scale value is large, the load weight value is not the same as the value of the corresponding device model, please change the relevant value and click the save parameter button. Then power off the device, enter the calibration interface after restarting, and confirm that the relevant parameters are the same as the values ​​that should be set for the corresponding model. If the scale value is large, the weight is the same as that of the corresponding equipment model, please make sure that the weighing platform is empty, click the zero mark, and then place the standard weight of the relevant model equipment on the center of the weighing platform and wait 2s After stabilization, click on the target to load the weight. Then click return parameter. Corresponding weight CC002 ---- 200g CC005 ---- 500g The parameter setting is that the customer sets the corresponding parameters according to his own product to improve the measurement accuracy of his product. Click Default to load factory product parameters. Notes on weight sorting scales: The parameter settings are the currently loaded product property settings, and the newly created products use the default parameters. The parameters are defined as follows: Belt speed: When entering the detection function, the running speed of the conveyor belt. Speed ​​ratio: It is the electronic speed ratio, that is, the correspondence between the frequency of the inverter hz and the speed of the belt The equipment has been debugged before leaving the factory, please use the manufacturer. Do not change the electronic speed ratio at will, so as to avoid detection inaccuracy. After the belt rotation speed is changed, click to confirm the rotation speed to refresh the internal rotation speed of the inverter. HZ number removal delay: when sorting, get the product weight to the action time of the exclusion mechanism. If the rejection mechanism moves prematurely, increase this parameter; if the rejection mechanism is too late to delete, decrease this parameter. Action hold: The time from the action of the exclusion mechanism to the reset of the exclusion mechanism. After changing the culling delay and action holding time, you need to click the setting culling button to refresh the action time.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...
Thank you for your inquiry. For the many inquiries,we are too busy to contact you in time. Would you leave your contact information? Such as Email, Skype and Whatsapp.we will reply you as soon as possible. Thank you!