Brief analysis of the maintenance of the vertical

Vertical packaging machines are mostly used for the production of small snacks in daily life. The packaging styles not only meet the national hygiene standards, but also have beautiful packaging styles. And it occupies a large market share in the packaging machinery industry. The development of the food market has brought a broader market for packaging machines. The comprehensive combination said that the manufacturer's vertical packaging machine maintenance is divided into three steps, mechanical part, electrical part and mechanical lubrication. 

Lubrication of vertical packaging machine: The rolling bearing is a part of the machine that is worn more seriously, so each rolling bearing should be filled with grease once with a grease gun for about two months. Different types of lubricants are different, such as the sleeve on the supporting roller of the packaging film The shaft sleeve at the front sprocket of the feed conveyor should be filled with 40 # mechanical oil. 

Lubrication of chains is common. Relatively simple sprocket chains should allow drip of mechanical oil with a kinematic viscosity greater than 40 #. The clutch is the key to the packaging machine. The clutch part should be lubricated. 

Maintenance of the electrical part of the vertical packaging machine: the operator of the vertical packaging machine of the manufacturer said that he should always check whether the thread ends of the joints are loose before starting up. Dust and other small particles may also affect some functions of the packaging machine, photoelectric switch, proximity switch When the probe is covered with dust, it may cause misoperation, so it should be checked and cleaned frequently. The detailed parts are also the focus of mechanical cleaning. 

Regularly clean the surface of the horizontally sealed electric slip ring with soft gauze dipped in alcohol to remove the toner. Some parts of the vertical packaging machine cannot be changed at will. Non-professional combination said that the person in charge of the packaging machine of the manufacturer should not open the electrical part and the inverter , The parameters or programs of microcomputers and other control elements have been set, and random changes will cause the system to malfunction and the machinery cannot operate normally.