Basic cleaning and maintenance requirements for

Many users often overlook the conventional cleaning and maintenance of packaging scales. These two tasks are important. Doing a good job can greatly increase the service life of the packaging machine and reduce the failure rate, but if you are negligent about this, Will have a negative impact. After the packaging scale is shut down, the measuring part should be cleaned in time. If the packaging is granulated sugar, isatis root powder, salt, etc., the feeding tray and turntable must be cleaned every shift to prevent corrosion. The heat sealer body of the packaging scale should be cleaned frequently, and the texture of the seal is clear. Packing scale is a kind of packaging weighing equipment, which should be operated by fixed personnel, and requires staff to be proficient in the start-up and bag-making procedures, simple instrument debugging, parameter changes, etc. The basic requirements for daily maintenance of packaging scales are to allow the inside and outside of the computer meter box to be clean and dry; in addition, it is also necessary to regularly check that the wiring terminals are not loose or falling off, and that the circuits and air paths are unobstructed. What needs to be cleaned are the photoelectric tracking luminous head of the packaging scale, the scattered materials on the tray, the dust in the electric control box, etc., to ensure the small error of the cursor tracking, to keep the parts clean, to prevent poor contact of the electric control box, etc. malfunction. The packaging scale machinery inspects and tightens the transmission and moving parts within one week of use, refuels and maintains it; it must be regularly inspected and maintained every month thereafter. Regularly check the screws of various parts of the packaging scale to avoid loosening; At the same time, pay attention to the waterproof, moisture-proof, anti-corrosion, and rat-proof of the electrical parts; keep the inside of the electrical control box and the terminal clean to prevent electrical failure of the packaging scale. If shutdown is required, the two heat-sealing rollers of the packaging scale should be in the open position to prevent scalding of the packaging materials; there should be gear oil lubrication holes on the gears of the equipment, oil-filling holes of the bearing and other moving parts.